KFLL 1.1 Sloped Runway BGL FPS Issue

[dmbusmc]

Hi guys,

With P3d V5 my FPS take a severe hit at KFLL. I found this thread from June of last year pointing to an issue with the FLL_elevrwy.BGL file: viewtopic.php?f=12&t=579&start=30

In that thread, v1.1 is said to include a fix for this issue. I purchased from Simmarket in December 2020 and downloaded the non-PBR version. As you can see in the attached picture the installer is version 1.1 for v5, yet the BGL file was last updated in March of 2020. The thread says the update should have been in July of 2020.

KFLL.JPG (17.18 KiB) Viewed 2677 times

I found that if I disable this BGL my FPS issues are completely solved, but 10R/28L are a mess with artifacts and a flat runway with elevated taxiways. I'm wondering if I can get the fixed BGL that fixes the FPS issue as posted in that thread?

Thank you!

Kyle

[RicardoLVFR]

Hi, originally this file shouldn't cause issues. The file contains platforms for the sloped runway, it seems that on certain systems for some unknown reason it causes problems.

How bad are the FPS ? what performance you get at KFLL?

[dmbusmc]

Hi Ricardo,

Frames drop approxiamately 50%. I usually use Nvidia to limit frames to 30, and while I am at KFLL frames dip down to 20 with bad stutters. If I set frames to unlimited I go from 40-45 on approach to 20-25 on/near the ground with even worse stutters. When I disable that FLL_elevrwy.BGL my frames are back to normal and the whole thing is silky smooth with great fps.

If it helps for system specifics I have v5.1.1 Professional, Windows 10 Pro v19041, I7-6700k at 4.6ghz, Nvidia 3090 v461.09, 32gb DDR4.

[RicardoLVFR]

Do you have our KMIA on the background too?

[dmbusmc]

No sir, no other scenery in Florida.

[RicardoLVFR]

No sir, no other scenery in Florida.

And this happens with any aircraft you use correct?

[dmbusmc]

Correct, from the default F35 flight, the default UH60, to FSLabs 320, any aircraft. If I remove that BGL all aircraft are super smooth with no FPS hit.

[vno]

Hello,

can you send me the fixes for KFLL. The latest KFLL 1.1 version blocks me P3D5 HF1 when loading AI traffic at around 77%. I can't find these fixes on my account.

cordially

[RicardoLVFR]

Hello,

can you send me the fixes for KFLL. The latest KFLL 1.1 version blocks me P3D5 HF1 when loading AI traffic at around 77%. I can't find these fixes on my account.

cordially

hi, email us for that request please.

[Riky FSX]

Hi guys,

With P3d V5 my FPS take a severe hit at KFLL. I found this thread from June of last year pointing to an issue with the FLL_elevrwy.BGL file: viewtopic.php?f=12&t=579&start=30

In that thread, v1.1 is said to include a fix for this issue. I purchased from Simmarket in December 2020 and downloaded the non-PBR version. As you can see in the attached picture the installer is version 1.1 for v5, yet the BGL file was last updated in March of 2020. The thread says the update should have been in July of 2020.

KFLL.JPG

I found that if I disable this BGL my FPS issues are completely solved, but 10R/28L are a mess with artifacts and a flat runway with elevated taxiways. I'm wondering if I can get the fixed BGL that fixes the FPS issue as posted in that thread?

Thank you!

Kyle

Hi guys,

I've the same issues, very low fps with any aircrafts.
I have downloaded the non PBR version 1.1 from my account but i still have problems.
I also write you an email but you did not answer me.
Like other users if i rename to .off this file FLL_elevrwy.BGL the fps problems are gone but then there is no more slope runway.

It is possible to have the BGL that you sent to some users in this post viewtopic.php?f=12&t=579&start=30 ?

Thank you very much,
Riccardo