Here are my GSX coordinates for anyone that would like to set up GSX for their aircraft. It's the same profile I posted over at the fsdreamteam forum in the msfs gsx profile section.
As always, if something doesn't look right, just let me know.
Choose Customize Airplane option from the GSX Menu.
Enter the settings below...
Nosegear
-Nosegear Distance 16.52
Pax1
Passengers Door #1
-Door without open/close checks
-Position (m) -2.52 17.26 5.74
-Ceiling height (m) 1.80
-Angle (deg) 10.00
Cargo Main
-Door without open/close checks
-Position (m) -1.66 -18.90 3.98
-Ceiling height (m) 1.80
-Angle (deg) 10.00
-BELT
Pax2
Passengers Door #2
-Door without open/close checks
-Position (m) -2.84 8.64 5.72
-Ceiling height (m) 1.80
-Angle (deg) 0.00
Engine1
Engine #1
-Position (m) -9.33 2.19 3.24
Pax3
-No door at this position
Pax4
Passengers Door #4
-Door without open/close checks
-Position (m) -2.28 -22.68 5.92
-Ceiling height (m) 1.80
-Angle (deg) -10.00
GPU
-Position (m) 0.00 18.00 3.50
(IRL the GPU normally connects behind front landing gear, but the GSX vehicle will interfere with the gear and cargo truck)
Service1
Service Door #1
-Door without open/close checks
-Position (m) 2.52 17.26 5.74
-Ceiling height (m) 1.80
-Angle (deg) -10.00
Cargo1
Cargo Door #1
-Door without open/close checks
-Position (m) 1.48 13.52 3.76
-Angle (deg) 1.00
-AKE, ALF, ALP, AMP
Engine2
Engine #2
-Position (m) 9.33 2.19 3.24
Deicer In
-Position (m) 3.58 -3.36 5.48
Deicer Out
-Position (m) 29.10 -14.38 7.48
Fuel
Refueling point
-Position (m) 12.50 -3.38 5.76
Cargo2
Cargo Door #2
-Door without open/close checks
-Position (m) 1.54 -15.98 3.86
-Ceiling height (m) 1.80
-Angle (deg) 6.00
-AKE, ALF, ALP, AMP
Service2
Service Door #2
-Door without open/close checks
-Position (m) 2.30 -22.68 5.90
-Ceiling height (m) 1.80
-Angle (deg) 10.00
Lavatory
-Position (m) 0.00 -21.00 4.00
Water
-Position (m) 1.00 -19.62 3.96
GSX Profile A330-200
- 7heAngryVe7eran
- Posts: 432
- Joined: Mon Oct 23, 2023 3:38 am
- Location: Arkansas
- Contact: