KFLL V1.2 Bouncing/Wet Runway Fix? (P3D 5.2HF1)

Post product support request for our P3dv5 version products!
Post Reply
FBWFTW
Posts: 31
Joined: Thu Oct 15, 2020 3:02 pm

KFLL V1.2 Bouncing/Wet Runway Fix? (P3D 5.2HF1)

Post by FBWFTW » Wed Dec 15, 2021 4:10 am

Ricardo, do you still have that file that will fix/ the crazy bouncing on landing that was supposed to be the wet runway effects at KFLL?
I seem to remember the fixed SODE file absolutely tanking my frame performance prior to this-back in 5.0HF2/5.1 days
Don’t remember why.


I have a video I can upload and show you if you’d like
This is for KFLL V1.2 Non PBR/Non Slope

PS: it was indeed TE Florida that put the platform elevation at the end of my 10R KFLL V1.2 NON PBR-when I disabled that it was back to flat. As for the VRAM, I’m still pulling 9.1/10.8GB VRAM-it doesn’t matter whether I enable or disable KMIA. Frames are decently good. Anywhere from 25-40 or so depending on where.

User avatar
RicardoLVFR
Site Admin
Posts: 4625
Joined: Thu Sep 20, 2018 12:35 am
Location: Orlando, FL

Re: KFLL V1.2 Bouncing/Wet Runway Fix? (P3D 5.2HF1)

Post by RicardoLVFR » Wed Dec 15, 2021 12:28 pm

FBWFTW wrote:
Wed Dec 15, 2021 4:10 am
Ricardo, do you still have that file that will fix/ the crazy bouncing on landing that was supposed to be the wet runway effects at KFLL?
I seem to remember the fixed SODE file absolutely tanking my frame performance prior to this-back in 5.0HF2/5.1 days
Don’t remember why.


I have a video I can upload and show you if you’d like
This is for KFLL V1.2 Non PBR/Non Slope

PS: it was indeed TE Florida that put the platform elevation at the end of my 10R KFLL V1.2 NON PBR-when I disabled that it was back to flat. As for the VRAM, I’m still pulling 9.1/10.8GB VRAM-it doesn’t matter whether I enable or disable KMIA. Frames are decently good. Anywhere from 25-40 or so depending on where.
Hi, yes email me so we can send you the SODE file.
Ricardo Morillo
Managing Director/Owner

FBWFTW
Posts: 31
Joined: Thu Oct 15, 2020 3:02 pm

Re: KFLL V1.2 Bouncing/Wet Runway Fix? (P3D 5.2HF1)

Post by FBWFTW » Wed Dec 15, 2021 4:34 pm

RicardoLVFR wrote:
Wed Dec 15, 2021 12:28 pm
FBWFTW wrote:
Wed Dec 15, 2021 4:10 am
Ricardo, do you still have that file that will fix/ the crazy bouncing on landing that was supposed to be the wet runway effects at KFLL?
I seem to remember the fixed SODE file absolutely tanking my frame performance prior to this-back in 5.0HF2/5.1 days
Don’t remember why.


I have a video I can upload and show you if you’d like
This is for KFLL V1.2 Non PBR/Non Slope

PS: it was indeed TE Florida that put the platform elevation at the end of my 10R KFLL V1.2 NON PBR-when I disabled that it was back to flat. As for the VRAM, I’m still pulling 9.1/10.8GB VRAM-it doesn’t matter whether I enable or disable KMIA. Frames are decently good. Anywhere from 25-40 or so depending on where.
Hi, yes email me so we can send you the SODE file.
Email sent! Thanks as always

noahharget
Posts: 14
Joined: Sun Nov 24, 2019 2:50 am

Re: KFLL V1.2 Bouncing/Wet Runway Fix? (P3D 5.2HF1)

Post by noahharget » Wed Apr 12, 2023 2:46 pm

I just realized in Wet conditions this happened to me as well lol

Ben F.
Posts: 4
Joined: Thu Oct 04, 2018 5:34 pm

Re: KFLL V1.2 Bouncing/Wet Runway Fix? (P3D 5.2HF1)

Post by Ben F. » Wed Oct 18, 2023 5:58 pm

Having this issue as well, would I be able to get this fix as well. Thanks!

User avatar
RicardoLVFR
Site Admin
Posts: 4625
Joined: Thu Sep 20, 2018 12:35 am
Location: Orlando, FL

Re: KFLL V1.2 Bouncing/Wet Runway Fix? (P3D 5.2HF1)

Post by RicardoLVFR » Wed Oct 18, 2023 7:17 pm

send us an email about this issue: support@latinvfr.com
Ricardo Morillo
Managing Director/Owner

Post Reply