LatinVFR forums

Hey guys,
When flying the A320ceo after about 20 minutes after take-off Engine 2 shuts down, I can re-start it and its fine for the rest of the flight but it happens on every single flight I've done, I only use the CFM engines and not the IAE engines so I can't speak for them.
EDIT: It does happen on the IAE engines.
Also during the flight, the ECAM memos stay on from take-off and won't disappear till I start approach.

Shutdown must be because the center tank pump must be turned off when it runs out. We will fix this on the systems so it doesn't happen on an update.

As for ECAM memos, they should appear before takeoff on the ground, and the landing memo whist on approach. Let us know