KBWI Elevation Issues

Post product support request for our P3dv4 version products!
Post Reply
freddiel
Posts: 3
Joined: Fri Apr 03, 2020 7:38 pm

KBWI Elevation Issues

Post by freddiel » Fri Apr 03, 2020 7:46 pm

Ever since I have had KBWI, I've noticed a couple key issues in terms of elevation:
Intersection of taxiways U and P (or maybe T), there seems to be a hole in the ground. Whenever I'm taxiing to the A-C gates to RWY28 and making the right turn from P (or T) to U, the aircraft acts like it taxied into a ditch, even though I'm on the middle of the taxiway.
Runway 10 short final - I was landing RWY 10 and around 100 feet AGL, right above the start of the displaced threshold, the aircraft acted like it hit a fence, even though there appeared to be nothing there. I was not low on approach at all. The aircraft almost stopped midair like it got caught in a tree, then wiggled out and I was able to touch down normally.
Also, bunches of little bumps all over the taxiways and runways.
I ran the V1.1 fix available on SimMarket but nothing changed.

User avatar
RicardoLVFR
Site Admin
Posts: 4501
Joined: Thu Sep 20, 2018 12:35 am
Location: Orlando, FL

Re: KBWI Elevation Issues

Post by RicardoLVFR » Fri Apr 03, 2020 11:34 pm

Hi, can you show me pictures of where you have 'hole in the ground'? and where you say you are taxiing into a ditch.

you fly with crash detector off?
Ricardo Morillo
Managing Director/Owner

freddiel
Posts: 3
Joined: Fri Apr 03, 2020 7:38 pm

Re: KBWI Elevation Issues

Post by freddiel » Sat Apr 04, 2020 4:47 am

I do not have crash detection on.
Attachments
Capture.JPG
Capture.JPG (28.41 KiB) Viewed 964 times

User avatar
RicardoLVFR
Site Admin
Posts: 4501
Joined: Thu Sep 20, 2018 12:35 am
Location: Orlando, FL

Re: KBWI Elevation Issues

Post by RicardoLVFR » Sat Apr 04, 2020 6:14 pm

freddiel wrote:
Sat Apr 04, 2020 4:47 am
I do not have crash detection on.
Thank you will check and let you know.
Ricardo Morillo
Managing Director/Owner

Post Reply