KFLL aircraft hits bumps along T taxiway & south runway

[Wise87]

Is there anyway to fix the bumps that happens when we either taxi on T taxiway or being on runway 10R? I was flying Spirit and taxied from holding point T8 to 10R along taxiway T when my plane bounced twice along T taxiway. As I was departing I hit the bumps again on the runway. I know it has to do with the slopes. If were using an ACARS program and we hit the pumps it crews up our flight tracking. Anyone else seeing this? I talked to a few others who have also seen this issue.

[RicardoLVFR]

Hi, can you send us a picture of where exactly is this happening on Taxiway T?

[Wise87]

The first spot is on T just before N and the second spot is when you turn on N from T.
https://youtu.be/RYVuaZXRu6k

https://prnt.sc/rn7xb6

https://prnt.sc/rn7zcp

[RicardoLVFR]

thank you we received same reports before but we did not find an issue, we will revise again and if so release a hotfix.

[Wise87]

I should have added, several of us in my VA are all seeing this issue and we all have different setups. I take it now that v5 is out that support and fixing this issue is not going to happen for 4.x users?

[RicardoLVFR]

Hi, I tried to replicate the problem, but haven't. Will keep trying.

The sloped runway for KFLL will be the same in P3dv5, its not going to change, because the runway goes above a road like in KFLL, to do a sloped runway with native methods in P3dv5 won't work.