LVFR KMIA V5.1 AFCAD ERRORS

Post product support request for our P3dv4 version products!
Post Reply
downscc
Posts: 4
Joined: Wed Jun 26, 2019 8:36 pm

LVFR KMIA V5.1 AFCAD ERRORS

Post by downscc » Tue Sep 10, 2019 10:40 pm

I found the Northeast Cargo Ramp parking as depicted in the scenery does not match the parking spot numbers assigned in your AF (AFCAD file), specifically spots Gate N 18 through N 26. I didn't check others, but these are used by a cargo operator that many based their simulation flights on (Atlas B744/748s).

Also, your AF has all ILS approaches set up as ILS/DME approaches and this is not what the FAA publishes for KMIA. One of the ILS has no DME and two of the ILS have no GS and are shown as LOC/DME approaches. This information is readily available to the public at no cost at the FAA National Airspace Data Center https://www.faa.gov/air_traffic/flight_ ... aero_data/. I suggest this information source be used in developing your AF files within the FAA jurisdiction. You cannot use default navaids and assume those are correct.
Dan Downs KCRP

User avatar
RicardoLVFR
Site Admin
Posts: 4663
Joined: Thu Sep 20, 2018 12:35 am
Location: Orlando, FL

Re: LVFR KMIA V5.1 AFCAD ERRORS

Post by RicardoLVFR » Wed Sep 11, 2019 12:00 am

Will fix the gates for the next update.

The ILS with no G/S I think you mean of the northern runways 08L/26R. That's because in the past AI traffic had issues landing on those runways with no G/S. So that's why its like that. Will revise the DME info.
Ricardo Morillo
Managing Director/Owner

Post Reply