when arriving at Barcelona LEBL, typically at runway 07L, taxiing towards the stand at Terminal 1 via taxiways E & J, the ground markings of the whole apron area of Terminal 1 disappear as soon as I taxi past approximately the 'tip' of the terminal building, that is after this 45° 'bend' from taxiway E3 to J5:
https://ibb.co/QH8Snby
You can see that the taxiway markings are still there, whereas the markings of the apron area are gone.
In this set of images you can see that from a bit of altitude, the markings partly appear, depeding on angle and distance:
https://ibb.co/VwsHdbj
https://ibb.co/BNvyhTK
https://ibb.co/QJLYHdt
This is the second time I encountered this behaviour, it was the same when I arrived in the 737. There's no difference depending on whether you use PTA altered shaders or standard shaders. When loading up the flight at Terminal 1, the markings are present again.
Needless to say it's a bit akward to taxi in without markings. I hope you can help me to resolve this. Sim is P3D 4.5 HF2.