Runway lights dosen't work

pipo_araya · Post by **pipo_araya** » Fri Apr 26, 2019 2:58 am

Hi everyone,
I have a little problem with this escenary, when I´ve using SCEL airport at night, it's doesn't activate the following lights: ALSF-2, HIRL. Just work the taxiway lights.

How I can solve this problem??

Regards.

Post by **RicardoLVFR** » Fri Apr 26, 2019 1:42 pm

Hi, confirm you have SODE installed.

And also don't check to see if there are lights on 'preview mode'. You must have the actual time to be night/dusk/dawn

pipo_araya · Post by **pipo_araya** » Sun Apr 28, 2019 12:17 am

I have SODE but have the following error: SimConnection is not installed.

What should I do?

Post by **RicardoLVFR** » Sun Apr 28, 2019 2:00 pm

Hi, you may have a faulty installation of simconnect.

when does it say that error?

pipo_araya · Post by **pipo_araya** » Mon Apr 29, 2019 4:35 am

HI!
When I open SOME main panel appear that error. How I can solve it?

Post by **RicardoLVFR** » Mon Apr 29, 2019 5:04 pm

You don't need to open the SODE main panel for our lights. If you receive that message it may be another issue. But confirm you dont have the lights please.

pipo_araya · Post by **pipo_araya** » Thu May 02, 2019 1:58 pm

Hello,
I'm still without any runway lights

Post by **RicardoLVFR** » Thu May 02, 2019 2:06 pm

Hi, it seems you need simconnect installed,

do this:
http://www.fspassengers.com/?action=simconnect

you can download and install then install SODE.

LatinVFR forums

Runway lights dosen't work

Runway lights dosen't work

Re: Runway lights dosen't work

Re: Runway lights dosen't work

Re: Runway lights dosen't work

Re: Runway lights dosen't work

Re: Runway lights dosen't work

Re: Runway lights dosen't work

Re: Runway lights dosen't work