KMSY

Post product support request for our P3dv4 version products!
les1974
Posts: 11
Joined: Fri Nov 23, 2018 11:48 pm

KMSY

Post by les1974 » Wed Jan 08, 2020 4:34 pm

Good morning,

Let me say first that I enjoy your airports very much and they work well performance wise. However, for reasons I have yet to figure out, performance and visuals at KMSY make the airport unusable. I have tried uninstalling, updating drivers, messed around with various settings, built a new P3DV4 CFG file and the works but nothing has moved the FPS from the low teens to single digits. I have dozens of add-on airports and none of them have performance issues of any kind with 100% AI traffic, including some of your other excellent works such as KMIA and KBWI. In addition to the lack of performance, the airport is covered in a brown hue. I thought turning on dynamic reflections did the trick but it does not work. I have no other option than to uninstall which is a shame because it looks great in the screenshots.

P3DV4.5 HF2
ORBX Global, Vector, Landclass
Intel i7 4790K 4.0GHZ
16GB DDR5 RAM
EVGA 750Ti 2GB VC

Regards,

Les Turner

User avatar
RicardoLVFR
Site Admin
Posts: 4661
Joined: Thu Sep 20, 2018 12:35 am
Location: Orlando, FL

Re: KMSY

Post by RicardoLVFR » Wed Jan 08, 2020 4:57 pm

Hi, very sorry to hear this, can you post your 'display settings' for us?

the video card is a bit on the down side, but let us know how you have P3d set up. Do you also have KMIAv5? or any other PBR airport?
Ricardo Morillo
Managing Director/Owner

les1974
Posts: 11
Joined: Fri Nov 23, 2018 11:48 pm

Re: KMSY

Post by les1974 » Thu Jan 09, 2020 1:39 am

Yes, I have about a dozen other airports that use PBR and I purchased KMIAV5 but went back to V4 due to personal preference. Yes my graphics card is not the best but like I said I have no issues with other airports, even at JFK, ORD, and ATL where I run 90% AI and still get a smooth experience. Hopefully you can find a solution for me. Settings are attached. I've also attached my CFG file.

Thanks
Attachments
P3d setting3.JPG
P3d setting3.JPG (79.02 KiB) Viewed 1906 times
P3d setting2.JPG
P3d setting2.JPG (92.64 KiB) Viewed 1906 times
P3d setting1.JPG
P3d setting1.JPG (100.32 KiB) Viewed 1906 times

les1974
Posts: 11
Joined: Fri Nov 23, 2018 11:48 pm

Re: KMSY

Post by les1974 » Thu Jan 09, 2020 1:41 am

Here is my CFG file.
Attachments
Prepar3D.zip
(4.37 KiB) Downloaded 176 times

User avatar
RicardoLVFR
Site Admin
Posts: 4661
Joined: Thu Sep 20, 2018 12:35 am
Location: Orlando, FL

Re: KMSY

Post by RicardoLVFR » Thu Jan 09, 2020 1:08 pm

hi, your AA setting is too high, please try reducing it and let me know. And can you be specific as to which other PBR airport you have and runs well, can you tell me which?
Ricardo Morillo
Managing Director/Owner

les1974
Posts: 11
Joined: Fri Nov 23, 2018 11:48 pm

Re: KMSY

Post by les1974 » Fri Jan 10, 2020 3:35 am

Flytampa airports all perform well KLAS in particular.
Attachments
kmsy.JPG
kmsy.JPG (229.7 KiB) Viewed 1897 times

User avatar
RicardoLVFR
Site Admin
Posts: 4661
Joined: Thu Sep 20, 2018 12:35 am
Location: Orlando, FL

Re: KMSY

Post by RicardoLVFR » Fri Jan 10, 2020 1:29 pm

hi, if you put dynamic reflections on NONE, does it help?
Ricardo Morillo
Managing Director/Owner

les1974
Posts: 11
Joined: Fri Nov 23, 2018 11:48 pm

Re: KMSY

Post by les1974 » Fri Jan 10, 2020 3:16 pm

No, the dynamic reflections tab makes no difference at all.

User avatar
RicardoLVFR
Site Admin
Posts: 4661
Joined: Thu Sep 20, 2018 12:35 am
Location: Orlando, FL

Re: KMSY

Post by RicardoLVFR » Fri Jan 10, 2020 5:46 pm

did you de-activate any of what we put in the scenery configurator?

it may very well be an issue also with the AI ship traffic. Let me know and I can tell you how to remove them to test.
Ricardo Morillo
Managing Director/Owner

les1974
Posts: 11
Joined: Fri Nov 23, 2018 11:48 pm

Re: KMSY

Post by les1974 » Fri Jan 10, 2020 6:16 pm

Deactivated everything but ship traffic, I will test and get back to you.

Post Reply