New terminal for SCEL?

trisho0 · Post by **trisho0** » Mon Nov 12, 2018 1:56 pm

Yes, tried again and it worked..... GSX has a glitch

juanchopancho · Post by **juanchopancho** » Tue Nov 13, 2018 12:42 am

I have same issue with SODE gates. The gates are not missing, but they don't move.

At gate 21 with FSLABs A320 parked. SODE is not detecting the jetway. I'm using P3Dv4.3 / GSX2 maybe that's the issue?

juanchopancho · Post by **juanchopancho** » Tue Nov 13, 2018 12:44 am

I'm going to run the FSDT Live updater and test again.

Post by **RicardoLVFR** » Tue Nov 13, 2018 1:06 am

I had a customer email with issues with SODE/GSX.

I asked him which file was GSX looking at, go to "CUSTOMIZE AIRPORT POSITIONS" and check which bgl file is reading. ours is SCEL_ADEP4_RGM.bgl.

it should read that one.

trisho0 · Post by **trisho0** » Tue Nov 13, 2018 1:09 am

Jetways move in mine using SODE command. Didn't try yet with GSX Level2.
The jetway in Gate A21 moved in mine after reposition the Bird closer. Otherwise, it is too far and will not animate.

vader7472 · Post by **vader7472** » Tue Nov 13, 2018 2:17 am

Hello!

Awesome scenery! I felt just like when v1 was released 8 years ago

.

I agree with trishoo. I am making an assessment of the gates. 21 and 22 have this problem. (In fact, both gates are Heavy Gates in real life. Gate 22 has its centerline very far from the real deal. I can give you the real centerline spots for gates 22-16 - I work at the Airport

)

On Pier C (Espigón C in spanish, which opens in december

) this happens in gate C4:

Again, thank you for this wonderful scenery! It was a pleaseant surprise!

Nico

trisho0 · Post by **trisho0** » Tue Nov 13, 2018 2:19 am

I should say Gate 21 instead of A21, sorry. Installed ver 2.1 and it still the same. The plane must be closer to jetway until a new update becomes available.

Post by **RicardoLVFR** » Tue Nov 13, 2018 12:48 pm

Yes this seems like an issue that needs to be solved, my apologies for that, we should get those jetways a bit more closer so that they connect. This will be done in the next update.

trisho0 · Post by **trisho0** » Tue Nov 13, 2018 1:09 pm

By looking at the photo with crossed jetways I think is not the scenery issue. We must to select the proper jetway and airplane door to dock accordingly. I might be wrong .....

vader7472 · Post by **vader7472** » Tue Nov 13, 2018 3:36 pm

Yep, I though of that. But as you can see, Gate 1 cannot be connected to Door 1, just Door 2. And gate 2, can indeed connect to Door 1 or 2. This may happen if I want to dock the gates per GSX suggests. Otherwise, I would only have 1 gate to dock

Thanks!
Nico

LatinVFR forums

New terminal for SCEL?

Re: New terminal for SCEL?

Re: New terminal for SCEL?

Re: New terminal for SCEL?

Re: New terminal for SCEL?

Re: New terminal for SCEL?

Re: New terminal for SCEL?

Re: New terminal for SCEL?

Re: New terminal for SCEL?

Re: New terminal for SCEL?

Re: New terminal for SCEL?