LVFR TJSJ (San Juan Intl.) conflicting with Navigraph (RESOLVED)

[Nerbulus]

When LVFR’s TJSJ is installed, the ILS 10 approach course is incorrect. The course is listed (on the MFD) as 090 when the Navigraph chart says 101. This causes an impossible ILS to fly (the localizer leads you into some buildings).

[RicardoLVFR]

For that runway we have placed a course heading 101.13. Will revise.

Are you sure you are using runway 10 and not 08?

[Nerbulus]

Hmm, yes I'm fairly certain. 08 has a course of 078 not 090 so I'm not sure where that's coming from.

[Nerbulus]

I'm not sure what's going on... the course for runway 08 is also wrong. It says 067 while the chart says 078 (open image in new tab to see better).
It looks like all courses are offset to the LEFT by 11 degrees (-11 degrees). 101 becomes 90, 78 becomes 067...

[RicardoLVFR]

I'm not sure what's going on... the course for runway 08 is also wrong. It says 067 while the chart says 078 (open image in new tab to see better).
It looks like all courses are offset to the LEFT by 11 degrees (-11 degrees). 101 becomes 90, 78 becomes 067...

Ok will further test, when was the last time you installed TJSJ? because we might have fixed this with an update.

[Nerbulus]

I'm still on 1.0.0, was there an update?

[RicardoLVFR]

Just did a test on the 10 ILS, all good. Please verify what you may have on the community folder



Picture is autoland.

[RicardoLVFR]

I'm still on 1.0.0, was there an update?

Yes, its on 1.1

That may be the reason. Please download/and let it install.

[Nerbulus]

I've updated and all is now working well. Thanks for the help!