KFLL runway 10L issue

Post product support request for our P3dv5 version products!
User avatar
RicardoLVFR
Site Admin
Posts: 4654
Joined: Thu Sep 20, 2018 12:35 am
Location: Orlando, FL

Re: KFLL runway 10L issue

Post by RicardoLVFR » Sat Apr 18, 2020 12:10 am

citation79 wrote:
Fri Apr 17, 2020 8:10 pm
yeah weather addon could be the performnce hog but the jumping on the runway is strange... didnt happen after the F35 test tho..
Teofilo
Yes we will have to further do more testing to see what's the problem there, I can't replicate it so I don't know how to fix it if its the scenery.
Ricardo Morillo
Managing Director/Owner

tangjuice81
Posts: 5
Joined: Sat Apr 25, 2020 7:58 pm

Re: KFLL runway 10L issue

Post by tangjuice81 » Sat Apr 25, 2020 8:21 pm

I landed twice on runway 28R in the FSLabs A321 and the aircraft started bouncing and wouldn't stop. I have a video and I need to upload it. But this didn't happen before HF3. So it could be an issue with the new Lockheed Martin HF3. Thanks in advance.

tangjuice81
Posts: 5
Joined: Sat Apr 25, 2020 7:58 pm

Re: KFLL runway 10L issue

Post by tangjuice81 » Sun Apr 26, 2020 2:16 am

So a user on the P3D v4 recommended changing the mesh to 1m or 5m res and 1m worked. I'm not sure why this happened because I never set it to 1m. But I'm sure you all will figure out a fix to this. Thanks for the new KFLL!

Dlev
Posts: 2
Joined: Sun May 03, 2020 10:36 pm

Re: KFLL runway 10L issue

Post by Dlev » Sun May 03, 2020 10:58 pm

Hey guys, I recently bought this scenery too. I have the same issue with the airplane jumping. It's worse on 10L/28R. When I land or takeoff I have to turn off the crash. Will try the Mesh thing another user suggested.

User avatar
RicardoLVFR
Site Admin
Posts: 4654
Joined: Thu Sep 20, 2018 12:35 am
Location: Orlando, FL

Re: KFLL runway 10L issue

Post by RicardoLVFR » Mon May 04, 2020 12:52 pm

Dlev wrote:
Sun May 03, 2020 10:58 pm
Hey guys, I recently bought this scenery too. I have the same issue with the airplane jumping. It's worse on 10L/28R. When I land or takeoff I have to turn off the crash. Will try the Mesh thing another user suggested.
Hi, the bumping will continue since aircraft for FSX/P3d are made with the wheels being in just one place and the transition is what causes the bumps. Aircraft in these sims are not designed for sloped runways, we will try to soften the slope in the near future.
Ricardo Morillo
Managing Director/Owner

Royy
Posts: 6
Joined: Sat Apr 25, 2020 3:35 am

Re: KFLL runway 10L issue

Post by Royy » Sun May 10, 2020 6:32 pm

I have the same issue with the airplane jumping. It's worse on 10L/28R.
What can we do now ?
P3DV4.5

No other scenery install around.

Why you dont produce an easy fix for that.

I am very disappointed, i just buy it and probabbly a fix will only come next year.

Refund in this case should be an option ?

Regards

User avatar
RicardoLVFR
Site Admin
Posts: 4654
Joined: Thu Sep 20, 2018 12:35 am
Location: Orlando, FL

Re: KFLL runway 10L issue

Post by RicardoLVFR » Mon May 11, 2020 8:12 pm

Hi, is the bumping like this: https://www.youtube.com/watch?v=MKMtq--m5b4
Ricardo Morillo
Managing Director/Owner

Royy
Posts: 6
Joined: Sat Apr 25, 2020 3:35 am

Re: KFLL runway 10L issue

Post by Royy » Sun May 24, 2020 11:22 pm

Hi,

I dont see any kind of bumping in the video.
In my side i continue to improve bumping in the runway.

Regards

rickster41
Posts: 6
Joined: Fri Apr 03, 2020 4:48 pm
Location: United Kingdom

Re: KFLL runway 10L issue

Post by rickster41 » Mon May 25, 2020 11:14 am

Hi.

I am also experiencing lots of bumping on the runway and taxi way on RW10R I have played around with all my settings and it does not improve. See the video i made showing the problem. https://youtu.be/GPfR6N93xbI. this was with P3d v4 but the same happens in V5.

User avatar
RicardoLVFR
Site Admin
Posts: 4654
Joined: Thu Sep 20, 2018 12:35 am
Location: Orlando, FL

Re: KFLL runway 10L issue

Post by RicardoLVFR » Mon May 25, 2020 3:41 pm

Hi, I see what's the problem, it due to this:

viewtopic.php?f=12&t=513

we have released a hotfix for this.
Ricardo Morillo
Managing Director/Owner

Post Reply